4-Way, 3-Position (Open Center) Manual

Category: .
Single or double-acting cylinders


Application – Single or double-acting cylinders.

Actuation – Lever operated, detent positioned.

Functions – The 9511 (open center) valve can be used if holding is not a requirement, as when running two separate hydraulic tools. Provides “advance” and “return” only.

Used on these pumps – P460, PA17, PA46, PA55, PE17, PE21, PE30, PE46, PE55, PE84, PE90,  PE120, PE200, PE400, PG30, PG55, PG120, PG400, PQ60 and PQ120 series. 

10,000 PSI., 3/8″ PORTS, 5 GPM MAX FLOW RATE.

NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached to valve 9511 if desired.

NOTE: Also, valves may be remote mounted with a 9510 Subplates.

IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps.

Order No. Cylinder
Application *
Operation Valve Type Volt Advance / Return Advance / Hold Return Posi-Check® Feature Weight (lbs.)
9511 S.A. & D.A. Manual 4-way, 3 Pos. Open Center — Yes Yes No 4.2
* “S.A.” represents single-acting cylinders, “D.A.” represents double-acting cylinders
4-Way/3-Position (Open Center) Manual Valves (9511) – Diagram

Related Products

  • full20_31236671x386_Valve9632

    Post-Tensioning Multi-Strand

  • full20_31291671x386_Valve9590

    4-way, 3-position Solenoid

  • full20_33615Valve9506

    4-Way, 3-Position (Tandem Ctr) Valve w/Posi-Check

  • full20_28399671x386_9500

    4-Way, 3-Position (Tandem Center) Manual