full20_31202671x386_9594

3/4 way, 2 position Air Actuated


Category: .
Single or double-acting cylinders

Application – Single or double-acting cylinders. When used with single-acting cylinders, one port should be plugged.

Actuation – Air Operated.

Functions – Oil is directed to « extend » side of cylinder, oil from « retract » side goes to reservoir; cylinder « holds » with pump shut off. Oil is directed « retract » side of cylinder: oil from « extend » side goes to reservoir.

Note: Cylinder will not « hold » in the « return » position with motor running or shut off.  

Used on these pumps – PA17, PA46 and PA55 Series.

10,000 PSI., 3/8″ PORTS, 5 GPM MAX FLOW RATE.

NOTE: Valve is shipped without controls. 9594 can be used with the Remote Hand Control l (No. 209593).

CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application.

IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps.

Order No. Cylinder
Application *
Operation Valve Type Volt Advance / Return Advance / Hold Return Posi-Check® Feature Weight (lbs.)
9594 S.A. & D.A. Air 3/4-way, 2 Pos. — No Yes Yes 11.0
* “S.A.” represents single-acting cylinders, “D.A.” represents double-acting cylinders
3/4-Way/2-Position Solenoid Valve (9594) – Diagram

Related Products

  • full20_28399671x386_9500

    4-way, 3-position Manual

  • full20_28399671x386_9500

    4-Way, 3-Position (Tandem Center) Manual

  • full20_31294671x386_Valve9605-1

    3-way, 3-position (Pilot Operated)

  • full20_31199671x386_9592

    3/4-way, 2-position Solenoid