Application – Single or double-acting cylinders. When used with single-acting cylinders, one port should be plugged.
Actuation – Solenoid operated.
Functions – Oil is directed to “extend†side of cylinder, oil from “retract†side goes to reservoir; cylinder “holds†with pump shut off. Oil is directed to “retract†side of cylinder; oil from “extend†side goes to reservoir.
NOTE: Cylinder will not “hold†in the “return†position with motor running or shut off.
Used on these pumps – 9552, 9572 and 9592 are used with PE17, PE30 (with carrying handles removed), PE46, PE55, PE84, PE90, PE200, PE400, PQ60 and PQ120 series.
10,000 PSI., 3/8″ PORTS, 5 GPM MAX FLOW RATE.
NOTE: Valves are shipped without controls. The 9552, 9572 and 9592 can be used with the Remote Hand Control (No. 304718).
NOTE: Ports are 1/4″ NPTF.
CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application.
IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps.
IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½†longer mounting screws are required.
For valves 9569, 9570Â and 9579, order four 10856 cap screws.
For valves 9552, 9572 and 9592, order four 12001 cap screws.
| Order No. | Cylinder Application * |
Operation | Valve Type | Volt | Advance / Return | Advance / Hold Return | Posi-Check® Feature | Weight (lbs.) |
|---|---|---|---|---|---|---|---|---|
| 9552 | S.A. & D.A. | Solenoid | 3/4-way, 2 Pos. | 230 | Yes | No | No | 14.6 |
| 9572 | S.A. & D.A. | Solenoid | 3/4-way, 2 Pos. | 24 | Yes | No | No | 14.6 |
| 9592 | S.A. & D.A. | Solenoid | 3/4-way, 2 Pos. | 115 | Yes | No | No | 14.6 |
| * “S.A.†represents single-acting cylinders, “D.A.†represents double-acting cylinders | ||||||||
| Catalog | |
| Operating Instructions | |
| Parts List | |
