full20_31124Pullers_PR3100J
full20_44524Pullers_PR_Series_App1full20_28573Pullers_PR_Series_App2full20_44526Pullers_PR3100S

PR Series


Category: .
100T Pulling Capacity: Quickly remove or install tapered roller bearings.

  • Quickly remove or install tapered roller bearings.
  • Designed with cooperation of major bearing manufacturers.
  • It’s a fast, simple, one-man operation with 100-tons of pulling force provided.
  • Completely portable for easy, convenient positioning and out-of-the-way storage.
  • The standard in most wheel shops.

Universal railroad axle journal roller bearing puller/installer

For years, the standard in most wheel shops. Power Team now has four models to choose for greater flexibility. With both sling and jack models available and two pumps to choose from, you can tailor the unit to match your needs. With the proper equipment and know-how, removal and installation of axle journal roller bearings takes an absolute minimum of time and effort.

Each unit will service a full line of bearings with rotating end caps, from class B thru GG. No other method can match Power Team’s simplicity. Removal is very easy. Simply remove the end caps, slip the pulling shoe between the bearings and the wheel, actuate the pump, and in seconds, 100 tons of pulling force removes the bearing. Installation is just as easy! Each unit is CSA certified (LR19814) and comes complete with a heavy-duty 100-ton hydraulic cylinder, 10,000 P.S.I. (700 bar) pump with remote control solenoid valve, hydraulic pressure gauge (No. 11543), a pulling shoe and installing tube.

Order No. Stroke (in.) Capacity (tons) Speed (in./min.) Weight (lbs)
Pull Inst. Advance Pull Inst.

PR2100J

15 1/2

100

68

35 7/16

3 3/16

4 7/16

1,162

PR3100J

15 1/2

100

68

35 7/16

3 3/16

4 7/16

1,146

PR2100S

15 1/2

100

68

35 7/16

3 3/16

4 7/16

1,003

PR3100S

15 1/2

100

68

35 7/16

3 3/16

4 7/16

1,008

PR Series - Jack Models (PR2100J/PR3100J) - Diagram
PR Series - Sling Models (PR2100S/PR3100S) - Diagram

Order
No.
A
(in.)
B
(in.)
C
(in.)
D
(in.)
E
(in.)
F
(in.)
PR2100J 32 15 1/16 41 11/16 36 29/32 78 58 3/4
PR3100J 32 15 1/16 41 11/16 36 29/32 78 58 3/4
PR2100S 24 3/8 11 - 50 1/2 64 1/4 38 3/4
PR3100S 24 3/8 11 - 50 1/2 64 1/4 38 3/4
Order
No.
Model
Type
Cylinder
Type
Valve
Type
Pump Information
H.P Phase Voltage
PR2100J † Jack Double-Acting Solenoid 2** 1 115 or 230*
PR3100J † Jack Double-Acting Solenoid 3 3 230 or 460*
PR2100S † Sling Double-Acting Solenoid 2 1 115 or 230*
PR3100S † Sling Double-Acting Solenoid 3 3 230 or 460*
* Prewired at factory for this voltage.  Other voltages available upon request.
** The 2 hp, 115 volt requires 30 amp service.
† Equipped with hydraulic pressure gauge Nr. 11543

 
Tooling order information

IMPORTANT…This tooling chart applies only to standard AAR configurations for freight care applications. In order to provide adapters needed to service housing-type locomotive and passenger car bearings, as well as metric bearings, Power Team must be provided with the following information: bearing manufacturer’s name and general arrangement drawing number, size of bearing to be serviced, railroad name and location and part numbers of adapters already in your possession if you currently own a Puller/Installer.

Tool Description Class and size of bearing assembly
TBU & SP « Metric Tooling »
120 130 140 150
Pulling Shoe Insert Adapter 351830 30512

30521

30520
Guide Tube & Cap Screw Assembly 253341 253342 253343 253344
Cap Screw** 253339 253394 253339 253395
Guide Tube Adapter 21247 21247 21247 21247
Installing Tube Adapter Ring 253335 253336 253337 253338
 ** Screws are supplied with the guide tube and should be ordered as replacements only.

Tool
Description
Class and size of bearing assembly to be serviced
Class B
4 1/4″ x 8″
(No.)
Class C
5″ x 9″
(No.)
Class D
5 1/2″ x 10″
(No.)
Class E
6″ x 11″
(No.)
Class EE
5 1/2″ Axle
(No.)
Class EE
6″ Axle
(No.)
Class F
6 1/2″ x 12″
(No.)
Class G
7″ x 12″
(No.)
Class G
6 1/2″ Axle
(No.)
Class GG
6 1/2″ Axle
(No.)
Pulling Shoe No. 420845 is included as part of basic machine –
Do Not Order
420846 420846 420846
Pulling Shoe
Insert Adapter
30522 30512 30521 30520 30520 30519 30519 - - -
Guide Tube & Cap
Screw Assembly
253313 253314 253317 253318 253316 253327 253320 253321 253319 253323
Cap Screw** 253156 253349 253308 253155 253307 253308 253310 253326 253309 253309
Guide Tube No.
Adapter
23934 21248 21248 21247 21247 21247 21247 21247 21247 21247
Installing Tube No. 30416 included as part of basic machine –
Do Not Order
30417 30417 30417
Installing Tube
Adapter Ring
21242 21258 21256-1 21255-1 21255-1 21257-1 21257-1 30586 30585 30585
NOTE: Adapters listed above are for servicing the following roller bearing assemblies: Brenco « Crown-Taper », New Departure-Hyatt « Hy-Roll Taper », SKF « Expediter » and Timken « AP ».

** Screws are supplied with the guide tube and should be ordered as replacements only.

Related Products

  • full20_31106Pullers_PHP8H

    Manual-Hydraulic Pusher

  • full20_107031Pullers_Bundle_PTPHC_110_01

    Hydraulic Pullers Bundle PTPHC Series 5-50 Ton

  • full20_32440Pullers_K82_Hydra_Grip_O_Matic_Puller_Accessory_Kits

    Hydra Grip-O-Matic Puller Kit

  • full20_30918Pullers_SetIPS17

    17.5T Hydraulic Master Puller Set