full20_101602Pump_PG4204S
full20_28493Pump_PG1204Sfull20_28492Pump_PG1200M_4D

PG120/PG420: Gasoline


Category: .
130-400 cu. in./min. Ideal for construction, structure moving and rigging applications.
  • Two-speed high performance pumps ideal for construction, structure moving and rigging applications.
  • A logical choice at work sites where electricity or compressed air are unavailable. For single- or doubleacting cylinders at operating pressures to 10,000 psi.
  • All gasoline engine/hydraulic pumps feature Posi-Check® valve to guard against pressure loss when valve is shifted from “advance” to “hold.”
  • PG1200 Series pumps powered by a Honda 4-cycle, 5.5 hp engine with automatic decompression and electronic ignition. Deliver over 1⁄2 gallon (1,30 cu. in.) of oil per minute at 10,000 psi.
  • A 5 gallon reservoir means adequate capacity for multi-cylinder applications. Dual element air cleaner protects engine from dusty environments.
  • Heavy duty “roll cage” provides pick-up points for lifting. Horizontal bars on PG1203, PG1204 and PG1204S protect unit, provide hand holds for carrying.
  • Rubber anti-skid insulation on bottom of reservoir resists skidding and dampens vibration. PG1200M-4 and PG1200M-4D include a pump cart with 12″ wheels.
  • Adjustable external pressure regulator.

PG1200M-4

  • For single-acting cylinders. Has 9520 3-way/3-position (tandem center) valve. 9596 load lowering valve and 9644 4-port manifold with individual needle valves at each port.
  • Has a 9796 coupler and 9797 dust cap at each port. Valving permits precise individual control of up to four cylinders.
  • A 9052 heavy duty, fluid filled pressure gauge (0-10,000 psi) is included.

PG1200M-4D

  • For single or double-acting cylinders with precise individual control of up to four cylinders possible.
  • Equipped same as PG1200M-4, except has 9506 4-way/3-position (tandem center) valve, and second 4-port manifold without needle valves mounted beneath 9644 manifold for operating double-acting cylinders.

PG420 Series Maximum output Hydraulic Power Package

  • Ideal for single or multiple cylinder applications. Has a 4-cycle, 20 hp Honda engine and 20 gallon hydraulic reservoir (17 gallons usable) with low oil level sight gauge.
  • Steel « roll cage » protects pump, has a lifting hook; 4″ dia. swivel casters provide mobility.
  • Delivers 400 cu. in. of oil at maximum operating pressure.
  • Has a 9506 4-way valve. On/off switch and speed control are protected by a panel. Sturdy molded case protects battery (not included).
  • EPA Clean Air Act EVAP Certified ProductÂ
Order No. For Use with Cyl. Type Description Valve Type Valve No. Valve Function Usable
(cu. in.)
Reservoir
Horsepower
Cycle
PG1203 Single-Acting Base model 5 1/2 hp gasoline pump with 5.7 gal. reservoir. 3-Way 9520 Advance Hold Return 1,300 5.5 4
PG1200M-4 Single-Acting PG1203 with cart, rollcage, load lowering valve, 4 port manifold & gauge. 3-Way
Manifold
9520
9644
Advance Hold Return** 1,300 5.5 4
PG120HM Single-Acting/ Double-Acting PG1200M-4D, except without « Roll Cage » and cart. Ideal for house moving industry 4-Way Manifold 9506
9642
Advance Hold Return** 1,300 5.5 4
PG1204 Double-Acting Base model 5 1/2 hp gasoline pump, with 5.7 gal. reservoir, roll cage and double-acting valve. 4-Way 9506 Advance Hold Return 1,300 5.5 4
PG1204S Double-Acting PG1204, except has roll cage, solenoid valve and 25 ft. cord. 4-Way
Solenoid***
9516 Advance Hold Return 1,300 5.5 4
PG1200M-4D Double-Acting PG1200M-4, except for double-acting systems. 4-Way
Manifold
9506
9642
Advance Hold Return** 1,300 5.5 4
PG4204 Double-Acting Base model 20 hp pump with 20 gal. reservoir. 4-Way 9506 Advance Hold Return 3,927 20 4
PG4204S Double-Acting PG4204, except has solenoid operated remote valve. 4-Way
Solenoid***
9516 Advance Hold Return 3,927 20 4
* Usable oil is calculated with oil fill at recommended level at 2 1/4″ below cover plate.
** Control up to 4 cylinders independently.
*** Has 25 ft. remote control cord.

PG120HM - Diagram

PG1203, PG1204, PG1204S - Diagram

PG1200M-4 and PG1200M-4D - Diagram

PG4204 and PG4204S - Diagram

Image 1: PG120HM
Image 2: PG1203, PG1204, PG1204S
Image 3: PG1200M-4 and PG1200M-4D
Image 4: PG4204 and PG4204S

Order No. Max Pressure Output
(psi)
rpm Oil Del.
(cu. in./min. @)
A
(in.)
B
(in.)
C
(in.)
D
(in.)
E
(in.)
F
(in.)
Prod. Weight w/ Oil
(lbs.)
100
(psi)
1,000
(psi)
5,000
(psi)
10,000
(psi)
PG120HM 10,000 3,600 480 175 150 130 23 15 1/2 14 1/4 19 13 5/16 12 1/8 150
PG1203 10,000 3,600 480 175 150 130 27 7/8 20 1/4 14 1/4 26 1/4 13 1/2 18 1/4 154
PG1204 10,000 3,600 480 175 150 130 27 7/8 20 1/4 14 1/4 26 1/4 13 1/2 18 1/4 154
PG1204S 10,000 3,600 480 175 150 130 27 7/8 20 1/4 14 1/4 26 1/4 13 1/2 18 1/4 161
PG1200M-4 10,000 3,600 480 175 150 130 42 1/8 18 25 42 1/2 26 1/4 7 1/4 260
PG1200M-4D 10,000 3,600 480 175 150 130 42 1/8 18 25 42 1/2 26 1/4 7 1/4 280
PG4204 10,000 3,600 1,240 1,120 475 400 50 1/4 52 52 — — — 435
PG4204S 10,000 3,600 1,240 1,120 475 400 50 1/4 52 52 — — — 440

PG120-PG420 Series - Performance

Related Products

  • full20_28490Pump_PG303

    PG30/55: Gasoline

  • full20_28454Pump_PA9

    PA9: Air – Single-Acting

  • full20_31185Pump_P59L

    P: Manual 2-Speed Lightweight

  • full20_31182671x386_P19

    P: Manual 2-Speed