18 cu. in./min: Vanguard Jr.® Series ideal for use with small hydraulically powered tools up to 55 Ton.
IDEAL FOR USE WITH SMALL HYDRAULICALLY POWERED TOOLS.
- Vanguard Jr.® pumps provide two-speed high performance in a light-weight, compact package.
- Gauge port provided on pump. Metal reservoir on all models.
- Equipped with a 1â„2 hp, 115 volt, 60/50 Hz single phase motor that starts under load, even at reduced voltage.
- Low amperage draw permits use with smaller generators and low amperage circuits.
- All pumps have a 10 foot remote control (PE183C has 25 foot remote control).
- CSA rated for intermittent duty. Noise level of 85-90 dBA.
For operating hydraulic crimping, cutting or other tools:
- No. PE183C – For crimping or pressing applications. Has special electrical circuitry to pulse/advance, hold at full pressure, build to a predetermined pressure, release and reset circuit. Features separate emergency return switch.
- No. PE184C – Allows you to alternately operate a spring-return cutting and/or crimping tool without disconnecting either tool. Select port connection with manual 4-way valve, start pump with remote control hand switch and extend connected tool. When hand switch is switched to off, pump stops and automatic valve opens, allowing tool to return. In center (neutral) position, manual control valve holds tool in position at time valve is shifted.
| Order No. | For use with Cyl. Type | Description | Valve Type | Valve Function | Control Switch ††| Motor | Reservoir Usable (cu .in.) |
|---|---|---|---|---|---|---|---|
| PE182 | Single-Acting | Base model pump has 1/2 hp pump with 2-Way valve and 1/2 gal. reservoir. | 2-Way | Advance Return†| Remote Motor Control (10 ft.) on/off | 1/2 hp, 110/115VAC** 50/60 Hz, A.C., Single Phase |
104 |
| PE183 | Single-Acting | PE182, except has 3-way valve. | 3-Way | Advance Hold Return | Remote Motor Control (10 ft.) on/off | 1/2 hp, 110/115VAC** 50/60 Hz, A.C., Single Phase | 104 |
| PE183-2 | Single-Acting | PE183, except has 2 gal. reservoir. | 3-Way | Advance Hold Return | Remote Control (10 ft.) | 1/2 hp, 110/115VAC** 50/60 Hz, A.C., Single Phase | 525††|
| PE183A∞ | Single-Acting | PE183, except has « dump valve ». | Auto./Dump Pump | Advance Return | Remote (10 ft.) | 1/2 hp, 110/115VAC** 50/60 Hz, A.C., Single Phase | 104 |
| PE183C∞ | Single-Acting | Special crimping pump. | Special, for crimping only | Advance Hold Return†| Remote Motor Control (25 ft.) on/off | 1/2 hp, 110/115VAC** 50/60 Hz, A.C., Single Phase | 104 104 |
| PE184 | Single-Acting/ Double-Acting | Base model pump has 1/2 hp pump for double-acting systems with 1/2 gal. reservoir. | 4-Way | Advance Hold Return | Remote Motor Control (10 ft.) on/off | 1/2 hp, 110/115VAC** 50/60 Hz, A.C., Single Phase | 104 |
| PE184-2 | Single-Acting/ Double-Acting | PE184, except with 2 gal. reservoir. | 4-Way | Advance Hold Return†| Remote Motor Control (10 ft.) on/off | 1/2 hp, 110/115VAC** 50/60 Hz, A.C., Single Phase | 525††|
| PE184C* | Single-Acting/ Double-Acting | Special crimping pump. | 4-Way | Advance Return | Remote Control (10 ft.) on/off | 1/2 hp, 110/115VAC** 50/60 Hz, A.C., Single Phase | 104 |
| * Also for use with special single-acting cylinder applications. ** Available with 220 Volt, 60/50 Hz motor (to order, place suffix “50-220†behind pump order number). Specify voltage when ordering. †Holds when motor is shut off and valve is in “advance†position. ††Pumps supplied with 2 gal. oil (usable oil is 355 cu. in.), will hold 2½ gal. when filled to within 1½ » below reservoir cover plate. ∞ Not to be used for lifting. |
|||||||
| Order No. |
Max Pressure Output (psi) |
rpm | dBa at Idle and 10,000 (psi) |
Amp Draw 115 V 10,000 (psi) |
Oil Del. (cu. in./min.@)†|
A (in.) |
B (in.) |
C (in.) |
D (in.) |
F (in.) |
G (in.) |
Weight with Oil (lbs.) |
|||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 (psi) |
100 (psi) |
5,000 (psi) |
10,000 (psi) |
||||||||||||
| PE182 | 10,000 | 12,000 | 85/90** | 10.2 Amps | 230 | 190 | 25 | 18 | 16 | 4 3/4 | 8 | 7 1/8 | 6 | 5 1/8 | 30 |
| PE183 | 10,000 | 12,000 | 85/90** | 10.2 Amps | 230 | 190 | 25 | 18 | 16 | 4 3/4 | 8 | 7 1/8 | 6 | 5 1/8 | 30 |
| PE183A | 10,000 | 12,000 | 85/90** | 10.2 Amps | 230 | 190 | 25 | 18 | 16 | 4 3/4 | 8 | 7 1/8 | 6 | 5 1/8 | 30 |
| PE184 | 10,000 | 12,000 | 85/90** | 10.2 Amps | 230 | 190 | 25 | 18 | 16 | 4 3/4 | 8 | 7 1/8 | 6 | 5 1/8 | 30 |
| PE183-2* | 10,000 | 12,000 | 85/90** | 10.2 Amps | 230 | 190 | 25 | 18 | 18 1/2 | 7 1/4 | 11 1/2 | 10 | 9 1/2 | 8 | 42 |
| PE184-2* | 10,000 | 12,000 | 85/90** | 10.2 Amps | 230 | 190 | 25 | 18 | 18 1/2 | 7 1/4 | 11 1/2 | 10 | 9 1/2 | 8 | 42 |
| PE183C ††| 10,000 | 12,000 | 85/90** | 10.2 Amps | 230 | 190 | 25 | 18 | 16 | 4 3/4 | 8 | 7 1/8 | 6 | 5 1/8 | 30 |
| PE184C ††| 10,000 | 12,000 | 85/90** | 10.2 Amps | 230 | 190 | 25 | 18 | 16 | 4 3/4 | 8 | 7 1/8 | 6 | 5 1/8 | 30 |
| * 2 1/2 gal. reservoir. ** Measured at 3 ft. distance, all sides. †Typical delivery. Actual flow will vary with field conditions. ††Special application pumps for cutting, crimping or pressing. |
|||||||||||||||
 
Go to Accessories section for product detail:
Hydraulic Pump Accessories:
| Catalog | |
| Operating Instructions | |
| Parts List | |
