full20_28481Pump_PE554S
full20_50356Pump_PE554Wfull20_28480Pump_PE554PTfull20_28479Pump_PE552

PE55: Electric Portable


Category: .
55 cu. in./min. Vanguard® Series heavy duty multiple-applications pump for cylinders up to 200 Ton.
HEAVY DUTY MULTIPLE-APPLICATIONS PUMP. HEAVY CONSTRUCTION AND CONCRETE STRESSING. LOW VOLTAGE STARTING POSSIBLE.

  • 1 1/8 hp, 12,000 rpm, 110/115 volt, 50/60 Hz universal motor; draws 25 amps at full load, starts at reduced voltage. CSA rated for intermittent duty.
  • 10 foot remote motor control (except PE552S which has a 25 foot remote motor and valve control).
  • True unloading valve achieves greater pump efficiency, allowing higher flows at maximum pressure.
  • Reservoirs available in sizes up to 10 gallons.
  • Light weight and portable. Best weight-to-performance ratio of all Power Team pumps.
  • “Assemble to Order” System: There are times when a custom pump is required. Power Team’s “Assemble to Order” system allows you to choose from a wide range of pre-engineered, off-the shelf components to build a customized pump to fit specific requirements. By selecting standard components you get a “customized” pump without “customized” prices. All pumps come fully assembled, add oil and ready for work.
Order No.*** For Use with Cyl. Type Description Valve Type Valve No. Valve Function Control Switch††Motor Reservoir
Usable
(cu. in.)
PE550 Single-Acting Base model 1 1/8 hp pump with 2 1/2 gal. reservoir, remote motor control - - - Remote Motor On/Off 1 1/8 hp*, 110/115 VAC 525
PE550-RP50 Single-Acting Base model 1 1/8 hp pump with 5 gal. reservoir, remote motor control & 3-way valve. - - - Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
1150
PE552 Single-Acting Base model 1 1/8 hp pump with 2 1/2 gal. reservoir, remote motor control & 3-way valve. 3-Way 9582 Advance Return** Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
525
PE552S Single-Acting PE552, except also has solenoid operated remote valve. 3-Way 9579 Advance Hold Return Remote Motor & Valve 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
525
PE552S-RP50 Single-Acting PE552, except also has 5 gal. reservoir, and a solenoid operated remote valve. 3-Way 9579 Advance Hold Return Remote Motor & Valve 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
1150
PE552A∞ Single-Acting PE552, except has « Auto Dump » valve. Auto/Dump 9610 Advance Return Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
525
PE553 Single-Acting 1 1/8 hp pump with 2 1/2 gal. reservoir. Valve has « Posi-Check » feature 3-Way†9520 Advance Hold Return Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
525
PE553-RP50 Single-Acting 1 1/8 hp pump with 5 gal. reservoir. Valve has « Posi-Check » feature 3-Way†9520 Advance Hold Return Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
1150
PE554 Double-Acting Base model 1 1/8 hp pump with 2 1/2 gal. res. and 4-way valve for double-acting systems 4-Way†9506 Advance Hold Return Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
525
PE554-RP50 Double-Acting Base model 1 1/8 hp pump with 5 gal. res. and 4-way valve for double-acting systems 4-Way†9506 Advance Hold Return Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
1150
PE554S-RP50 Double-Acting Pump equipped with 3/4-way solenoid valve and 5 gallon reservoir 3/4-Way 9592 Advance Hold Return Remote Motor & Valve 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
1150
PE554W Double-Acting Weather-resistant model 1 1/8 hp pump with 2 1/2 gal. res. and 4-way valve for double-acting systems. 4-Way†9506 Advance Hold Return Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
525
PE554W-RP50 Double-Acting Weather-resistant model 1 1/8 hp pump with 5 gal. res. and 4-way valve for double-acting systems. 4-Way†9506 Advance Hold Return Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
525
PE554T Double-Acting PE554, except has 9500 tandem center valve. 4-Way 9500 Advance Hold Return Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
525
PE554P Double-Acting For use with single-acting Spring Seat, Stressing Jack or double-acting cylinder. 4-Way 9500 Advance Hold Return Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
525
PE554PT Double-Acting For use with single-acting or double-acting Power Seat, Stressing Jacks ONLY. 4-Way 9628 Advance Hold
Sequenced Return
Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
525
PE554C Double-Acting Pump suitable to run multiple spring return tools. 4-Way 9511
††â€
Advance Hold Return Remote Motor 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
525
PE554S Double-Acting Pump equipped with 3/4-way solenoid valve. 3/4-Way 9592 Advance Hold Return** Remote Motor & Valve 1 1/8 hp*, 110/115 VAC
50/60 Hz, Single Phase
525
* Pumps available with 230 volt, 60/50 Hz motors. Specify voltage when ordering.
** Holds with motor shut off.
***To order PE55 series pumps with CSA approval, add “–C” to the Order No.
† Valves have Posi-Check® feature.
†† All remotes are 10 ft. long except for PE552S which is 25 ft. long.
†††Valving allows alternate and independent operation of two different spring return tools. Valve holds pressure only while valve is in “A” or “B” port position with pump motor shut off.
∞ Not to be used for lifting applications.
Pump PE55 Electric Portable - Diagram

Order No. Max Pressure Output
(psi)
rpm dBa at Idle and 10,000 (psi) Amp Draw 115 V – at 10,000
(psi)
Oil Del.
(cu. in./min. @) â€
A
(in.)
B
(in.)
C
(in.)
D
(in.)
E
(in.)
F
(in.)
G
(in.)
H
(in.)
Weight
w/ Oil
(lbs.)
0
(psi)
700
(psi)
5,000
(psi)
10,000
(psi)
PE55
Series
10,000 12,000 90/89* 25 704 440 74 56 18 1/4 11 1/2 9 1/2 7 10 8 14 – 65
*Noise level reading (dBA) measured at a 3 ft. distance, all sides.
** Amp draw at 10,000 psi, 230 Volts 50/60 Hz is 15 Amps.
PE55 and PED Series - Performance

Related Products

  • full20_31285Pump_PQ604S

    PQ60: Electric

  • full20_31287Pump_PQ1204

    PQ120: Electric

  • full20_28469Pump_PE213

    PE21: Electric 2 Speed

  • full20_33265671x386_FoundationPE55

    PE Foundation Repair Pump