The SPX PE39 is compact and capable of being used in a vertical or horizontal orientation. It is based on proven pump design for reliability in rugged torque wrench applications to support operation and maintenance requirements.
Quality means Lower Life-Cycle Costs:
- Over 100,000 cycles
- Continuous duty up to 50ËšC / 122ËšF ambient (optional cooling kit)
- Proven design: proven reliability
Enhanced Usability:
- Light weight and portable: 39 lbs. / 17.7 kg (without oil)
- Vertical or horizontal operation
- Removable control pendant (15 ft/ 5 m cord length)
- Removable 4″ calibration capable gauge
- Universal Motor for reduced voltage applications (up to -20% nominal voltage)
- 4-way valve (not for lifting applications)
Designed with Safety in Mind:
- Easily adjusted pressure regulator (relief) valve
- Fixed 1500 psi / 103 Bar pressure retract relief valve
| Order No. | Description |
|---|---|
| PE39YED1PR | 110/115 VAC – 50/60 Hz |
| PE39YED1BPR | 110/115 VAC – 50/60 Hz with cooling option |
| PE39PED1PR* | 220/230VAC – 50/60 Hz |
| PE39PED1BPR* | 220/230VAC – 50/60 Hz with cooling option |
| Â * European Only | |
Weight: Lbs/Kg:
39 lbs / 17.7 kg (without Oil)
Maximum Oil Capacity: (non-vented reservoir)
0.5 Gallons / 1.89 L (to fill line)
0.4 Gallons / 1.51L (useable)
Operating Environment:
Temperature: -13°F to 122°F / -25°C to +50°C
(If temperatures are at extremes of the operating range, it is recommended to use hydraulic oils that are rated for those temperatures. Refer to service manuals and cooling options)
Sound Level: 87 – 92 dB
Pressure: 0 – 10,000 psi (0 – 690 bar)
Typical Flow:
225 cu-in/min – 39 cu-in/min
3.7 L/min – 0.64 L/min
Power:
1.3 HP Universal Motor
( 115 volt – 50/60 Hz ) 14.5 amps
( 230 volt – 50/60 Hz ) 7.2 amps
Â
| Length | Width | Height | |||
|---|---|---|---|---|---|
| (in.) | (cm.) | (in.) | (cm.) | (in.) | (cm.) |
| 13.8 | 35.0 | 10.8 | 27.4 | 23.7 | 60.0 |
| Catalog | |
| Operating Instructions | |
