4-Way, 3-Position (Tandem Ctr) Valve w/Posi-Check

Category: .
Single or double-acting cylinders


Application – Single or double-acting cylinders.

Actuation – Lever operated, detent positioned.

Functions – “Advance,” “hold” and “return.” The Posi-Check® feature guards against pressure loss when shifting from “advance” to “hold” position.

Used on these pumps – P460, PA6D, PA17, PA46, PA55, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PED, PG30, PG55, PG120, PG400, PQ60 and PQ120 series.

10,000 PSI., 3/8″ PORTS, 5 GPM MAX FLOW RATE.

NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached to valves 9500, 9501, 9506, 9511 if desired.

NOTE: 9506 can be remote mounted with a 9510 Subplates.

IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps.

Order No. Cylinder
Application *
Operation Valve Type Volt Advance / Return Advance / Hold Return Posi-Check® Feature Weight (lbs.)
9506 D.A. Manual 4-way, 3 Pos. Tandem Center — No Yes Yes 5.1
* “D.A.” represents double-acting cylinders
4-Way/3-Position (Tandem Center) Valves with Posi-Check® (9506) – Diagram
Valve In-Line Diagram (9506, 9623) – Diagram

Related Products

  • full20_31216671x386_Inline9608

    Pressure Reducing Valve

  • full20_28402671x386_9502

    4-Way, 3-Position (Open Center) Manual

  • full20_31294671x386_Valve9605-1

    3-way, 3-position (Pilot Operated)

  • full20_33645Valve9589

    3-Way, 2-Position (Pilot Operated)