Slide hammer puller set
This very handy set is ideal for those close-quarter, inside pulling jobs. Very practical for pulling motor, generator, and magneto bearings. Also good for removing small-bore bushings, bearings, and oil seals.
| Order No. |
Description | Weight (lbs.) |
|---|---|---|
| SS2 | Slide hammer puller No. SS2 set | 5.8 |
Slide hammer puller set
This useful set contains a reversible-jaw slide hammer puller with a 2.5 lb. sliding hammer plus an assortment of special jaws (3 of each size) and adapters. In this set, you get all the versatility you demand of a slide hammer puller.
| Order No. |
Description | Weight (lbs.) |
|---|---|---|
| 1178 | Slide hammer puller set with 2.5-lb. sliding hammer. | 13.8 |
Sliding hammers only -
| Order No. |
Description | Weight (lbs.) |
|---|---|---|
| 22185 | Sliding Hammer | 2.5 |
| 34331 | Sliding Hammer | 5.0 |
Bearing cup remover
The 7136 is perfect for pulling internal bearing cups, seals, bushings, etc. Jaw spread – 15/16″ to 3 1/4″, reach to 3 1/2″. Use with any slide hammer having 5/8″-18 thread (Power Team 1155, 1156 or 927 Push-Puller®).
| Order No. |
Description | Weight (lbs.) |
|---|---|---|
| 7136 | Universal bearing cup remover. | 1.5 |
Pilot bearing pullers
These very versatile pullers are built especially for inside pulling jobs, and particularly for removing flywheel pilot bearings on machines and construction vehicles. Also very practical for pulling motor, generator and magneto bearings.
Special slide hammer puller
Ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil seals, etc. Internal pulling attachment has jaw spread of 1/2″ to 1 3/8″. Handle end has a 1/2″– 20 thread.
| Order No. |
Description | Weight (lbs.) |
|---|---|---|
| 1173 | Slide hammer puller | 3.5 |
| 1174 | Puller head, less slide hammer | 0.8 |
Basic slide hammer units
Compatible with internal pulling attachment. Compatible with female-threaded adapters, and male-threaded adapters. 24″ in length, 5/8″–18 threaded end.
| Order No. |
Description | Weight (lbs.) |
|---|---|---|
| 1155 | Basic slide hammer unit with 5 lb. hammer. | 7.3 |
| 1156 | Basic slide hammer unit with 2.5 lb. hammer. | 4.8 |
Reversible-jaw slide hammer pullers
Ideal for pulling gears, bearings, outer races, grease retainers, oil seals, etc. Two or three jaws may be used and positioned for “inside†or “outside†pulling jobs. Both have 5/8″– 18 threaded end so attachments and adapters may be used.
| Order No. |
Description | Weight (lbs.) |
|---|---|---|
| 1176 | Slide hammer puller with 2.5 lb. hammer, 27241 two-way head and 34698 jaws. | 8.0 |
| 1177 | Same as 1176 but No. 1177 with 5 lb. hammer | 10.5 |
Slide hammer pullers with cup pulling attachments
These combine a basic slide hammer with No. 1152 internal pulling attachment for removing oil seals, outer races, and bearing cups from blind holes.
| Order No. |
Description | Weight (lbs.) |
|---|---|---|
| 1157 | Slide hammer puller consisting of 1156 slide hammer and 1152 internal pulling attachment. | 9.7 |
| 1158 | Same as 1157 but with 1155 slide hammer. | 12.2 |
| Order No. |
Inside Spread | |
|---|---|---|
| Min. (in.) | Max. (in.) | |
| 1172 | 1/2 | 2 |
| 1174 | 1/2 | 1 3/8 |
Slide Hammer Puller Set (1178)
| Order No. |
2-Jaw Spread | Â | 3-Jaw Spread | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Inside | Outside | Inside | Outside | ||||||
| Min (in.) |
Max (in.) |
Min. (in.) |
Max (in.) |
Min (in.) |
Max (in.) |
Min. (in.) |
Max (in.) |
||
| 44195 | 1 1/2 | 4 1/2 | 3/4 | 5 | 1 1/2 | 4 3/4 | 1 | 4 1/2 | |
| 32054 | 3/4 | 2 3/8 | — | — | 1 | 2 3/4 | — | — | |
| 44148 | 2 3/4 | 5 1/2 | 3/4 | 7 1/2 | 3 1/4 | 6 1/4 | 1 | 6 1/2 | |
| 34698 | 1 1/4 | 3 1/2 | 1 | 4 1/2 | 1 1/2 | 4 1/4 | 1 1/2 | 4 1/2 | |
Pilot Bearing PullersÂ
| I.D. Spread | ||||
|---|---|---|---|---|
| Order No. |
Reach (in.) |
Min (in.) |
Max. (in.) |
Weight (lbs.) |
| 1170 | 3/4 | 1/2 | 1 1/2 | 4.9 |
| 1171 | 1 | 7/8 | 2 1/8 | 4.9 |
| 1172 | 1 3/4 | 1/2 | 2 | 4.9 |
Reversible-Jaw Slide Hammer Pullers
Â
| Order No. |
2-Jaw Spread | 3-Jaw Spread | Â | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Inside | Outside | Inside | Outside | |||||||
| Min (in.) |
Max (in.) |
Min. (in.) |
Max (in.) |
Min (in.) |
Max (in.) |
Min. (in.) |
Max (in.) |
Length (in.) |
Weight (lbs.) |
|
| 1176 | 1 1/4 | 3 1/2 | 1 | 4 1/2 | 1 1/2 | 4 12 | 1 1/2 | 4 12 | 27 | Â 8.0 |
| 1177 | 1 1/4 | 3 1/2 | 1 | 4 1/2 | 1 1/2 | 4 1/2 | 1 1/2 | 4 1/2 | 27 | Â 10.5 |
Slide Hammer Pullers with Cup Pulling Attachments
| Order No. |
Reach Max. (in.) |
Spread Min (in.) |
Spread Max (in.) |
Length (in.) |
Weight (lbs.) |
|---|---|---|---|---|---|
| 1157 | 4 | 1 1/2 | 6 | 28 | 9.8 |
| 1158 | 4 | 1 1/2 | 6 | 28 | 12.3 |
Go to Accessories section for product detail:
Accessories:
| Catalog | |
