full20_28338Pullers_1172_Slide_Hammer
full20_28333671x386_1155full20_28361Pullers_7136_Bearing_Cup_Removerfull20_28341Pullers_1177_Slide_Hammerfull20_28340Pullers_1176_Slide_Hammerfull20_28335Pullers_1158_Slide_Hammerfull20_28334Pullers_1156_Basic_Slide_Hammerfull20_31109671x386_1174full20_38053Pullers_1178_Slide_Hammer_Puller_Setfull20_31110Pullers_Sliding_Hammers_Onlyfull20_28339Pullers_1173_Slide_Hammerfull20_28337Pullers_1170_Slide_Hammer

Slide Hammer


Category: .
Practical for pulling motor, generator, and magneto bearings. Also good for removing small-bore bushings, bearings and oil seeds.

Slide hammer puller set
This very handy set is ideal for those close-quarter, inside pulling jobs. Very practical for pulling motor, generator, and magneto bearings. Also good for removing small-bore bushings, bearings, and oil seals.

Order
No.
Description Weight
(lbs.)
SS2 Slide hammer puller No. SS2 set 5.8


Slide hammer puller set
This useful set contains a reversible-jaw slide hammer puller with a 2.5 lb. sliding hammer plus an assortment of special jaws (3 of each size) and adapters. In this set, you get all the versatility you demand of a slide hammer puller.

Order
No.
Description Weight
(lbs.)
1178 Slide hammer puller set with 2.5-lb. sliding hammer. 13.8

Sliding hammers only -

Order
No.
Description Weight
(lbs.)
22185 Sliding Hammer 2.5
34331 Sliding Hammer 5.0

Bearing cup remover
The 7136 is perfect for pulling internal bearing cups, seals, bushings, etc. Jaw spread – 15/16″ to 3 1/4″, reach to 3 1/2″. Use with any slide hammer having 5/8″-18 thread (Power Team 1155, 1156 or 927 Push-Puller®).

Order
No.
Description Weight
(lbs.)
7136 Universal bearing cup remover. 1.5

Pilot bearing pullers
These very versatile pullers are built especially for inside pulling jobs, and particularly for removing flywheel pilot bearings on machines and construction vehicles. Also very practical for pulling motor, generator and magneto bearings.

Special slide hammer puller
Ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil seals, etc. Internal pulling attachment has jaw spread of 1/2″ to 1 3/8″. Handle end has a 1/2″– 20 thread.

Order
No.
Description Weight
(lbs.)
1173 Slide hammer puller 3.5
1174 Puller head, less slide hammer 0.8


Basic slide hammer units
Compatible with internal pulling attachment. Compatible with female-threaded adapters, and male-threaded adapters. 24″ in length, 5/8″–18 threaded end.

Order
No.
Description Weight
(lbs.)
1155 Basic slide hammer unit with 5 lb. hammer. 7.3
1156 Basic slide hammer unit with 2.5 lb. hammer. 4.8

Reversible-jaw slide hammer pullers
Ideal for pulling gears, bearings, outer races, grease retainers, oil seals, etc. Two or three jaws may be used and positioned for “inside” or “outside” pulling jobs. Both have 5/8″– 18 threaded end so attachments and adapters may be used.

Order
No.
Description Weight
(lbs.)
1176 Slide hammer puller with 2.5 lb. hammer, 27241 two-way head and 34698 jaws. 8.0
1177 Same as 1176 but No. 1177 with 5 lb. hammer 10.5

Slide hammer pullers with cup pulling attachments
These combine a basic slide hammer with No. 1152 internal pulling attachment for removing oil seals, outer races, and bearing cups from blind holes.

Order
No.
Description Weight
(lbs.)
1157 Slide hammer puller consisting of 1156 slide hammer and 1152 internal pulling attachment. 9.7
1158 Same as 1157 but with 1155 slide hammer. 12.2
Slide Hammer Puller Set (SS2)

Order
No.
Inside Spread
Min.  (in.) Max.  (in.)
1172 1/2 2
1174 1/2 1 3/8

Slide Hammer Puller Set (1178)

Order
No.
2-Jaw Spread  3-Jaw Spread
Inside Outside Inside Outside
MinÂ
(in.)
Max
(in.)
Min.
(in.)
Max
(in.)
Min
(in.)
Max
(in.)
Min.
(in.)
Max
(in.)
44195 1 1/2 4 1/2 3/4 5 1 1/2 4 3/4 1 4 1/2
32054 3/4 2 3/8 — — 1 2 3/4 — —
44148 2 3/4 5 1/2 3/4 7 1/2 3 1/4 6 1/4 1 6 1/2
34698 1 1/4 3 1/2 1 4 1/2 1 1/2 4 1/4 1 1/2 4 1/2

Pilot Bearing PullersÂ

I.D. Spread
Order
No.
Reach
(in.)
Min
(in.)
Max.
(in.)
Weight
(lbs.)
1170 3/4 1/2 1 1/2 4.9
1171 1 7/8 2 1/8 4.9
1172 1 3/4 1/2 2 4.9

Reversible-Jaw Slide Hammer Pullers

Pullers: Reversible-Jaw Slide HammerÂ

Order
No.
2-Jaw Spread 3-Jaw Spread Â
Inside Outside Inside Outside
Min
(in.)
Max
(in.)
Min.
(in.)
Max
(in.)
Min
(in.)
Max
(in.)
Min.
(in.)
Max
(in.)
Length
(in.)
Weight
(lbs.)
1176 1 1/4 3 1/2 1 4 1/2 1 1/2 4 12 1 1/2 4 12 27  8.0
1177 1 1/4 3 1/2 1 4 1/2 1 1/2 4 1/2 1 1/2 4 1/2 27  10.5

Slide Hammer Pullers with Cup Pulling Attachments

Order
No.
Reach
Max.
(in.)
Spread
Min
(in.)
Spread
Max
(in.)
Length
(in.)
Weight
(lbs.)
1157 4 1 1/2 6 28 9.8
1158 4 1 1/2 6 28 12.3

Go to Accessories section for product detail:

Accessories:

Catalog

Related Products

  • full20_28496Pullers_PH53CR

    Hydraulic Pullers

  • full20_35950Pullers_IPS30H_Set

    30T Capacity Puller Set

  • full20_28330Pullers_Mechanical_2_3_Jaw_1024_1026

    2 – 3 Jaw Pullers (Mechanical)

  • full20_35983Pullers_IPS5017_Set_1

    17.5 and 50 Ton Capacity Puller Set