full20_44148Accessories_Hydraulic_Fluids
full20_476439645_9646full20_44149Accessories_Hydraulic_FlameOutfull20_32438Accessories_Hydraulic_Oilfull20_476449647

Hydraulic Oil


Category: .
Use for dependable performance of all of your hydraulic pumps and cylinders.

Standard Hydraulic Oil
  • For dependable performance of all your hydraulic pumps and cylinders.
  • Contains foam suppressant additives and has a high viscosity index.

Flame-Out® 220 fire resistant hydraulic fluid*

  • Contains anti-rust, anti-foam and antisludge additives.
  • Provides fire resistant protection.
    (Note: Will burn if heat source is extreme enough. Will not, however, propagate the flame and is self-extinguishing when there is no ignition source.)
  • Provides maximum lubrication and heat transfer.
  • Offers a wider operating temperature range.
  • No need to change seals in your Power Team equipment. Just drain the standard oil and replace it with Flame-Out® 220.

Biodegradable Hydraulic Fluid

  • Biodegradable, non-toxic fluid withstands moderate to severe operating conditions; provides excellent protection against rust.
  • Offers superior anti-wear properties, has excellent multi-metal compatibility.

Developed to meet stringent performance requirements and satisfy growing environmental needs for hydraulic fluids which are readily biodegradable and non-toxic. Can be used with all Power Team pumps, cylinders, valves and other accessories using standard seals. Depending on the contamination or degradation levels which might be present in used fluid, small amounts of this substance, if spilled, will not affect ground water or the environment. Acceptable methods of disposal include use as a fuel supplement. Since this fluid will not typically be hazardous waste, additional disposal options may be available, including land farming or processing through sewage treatment facilities, if necessary approvals are obtained from appropriate regulatory authorities. This fluid has been tested against EPA 560/6-82-003 and OECD 301 for biodegradability, and toxicity has been tested against EPA 560/6-82-002 and OECD 203: 1-12. Not recommended for operation in temperatures below 20°F (-7°C) or above 160°F (71°C).

Recommended storage temperatures not below – 10°F (-23°C) or above 170°F (77°C).

Low Temperature Oil

  • Provides smooth, reliable operation in the coldest climate conditions.
Description Grade
(ASTM)
Specific Gravity
@ 60°F (16°C)
Color
(ASTM)
Flash Point Fire Point Pour Point Viscosity Foam Test
(ASTM)
SUS @
100°F (38°C)
SUS @
210°F (99°C)
Viscosity Index
Standard Oil 215 0.88 2 400°F
(204°C)
430°F
(221°C)
-30°F
(-34°C)
215 48 100 min. Pass
Flame-Out® 220 0.91 Light Amber 500°F
(260°C)
550°F
(288°C)
-15°F
(-26°C)
220 55 140 min. Pass
Biodegradable — 0.92 2 432°F
(224°C)
NA* -22°F
(-30°C)
183 53 213 min. Pass
Low Temp. — 0.87 6.5
(Red)
356°F
(180°C)
399°F
(204°C)
-48°F
(-45°C)
183 52 190 min. Pass
Order No. Oil Description Qty.
 U.S. Metrics European Metrics 
9636 Standard Oil 1 quart  57 cu. in.
9637 1 galllon 231 cu. in.
9638 2 1/2 gallons 577 cu. in.
9616 55 gallons -
 
9639 Flame-Out® 1 gallon 231 cu. in.
9640 2 1/2 gallons 577 cu. in.
 
9645 Biodegradable 1 gallon 231 cu. in.
9646 2 1/2 gallons 577 cu. in.
 
9647 Low Temperature 1 gallon 231 cu. in.

Related Products

  • full20_30815671x386_AirRemote

    Remote Air Motor Controls

  • full20_28382671x386_8140

    Male-Female Threaded Adapters

  • full20_33672Accessories_Large_Capacity_Reservoirs

    Large Capacity Reservoirs

  • full20_30805671x386_HoseTWH

    Hoses (Torque Wrench)