- Full off-center pressing at full rated capacity across width of upper frame without buckling or bending.
- Maximum “daylight†is 42″ x 36″, making positioning of even bulky work pieces easy.
- Height of press bed is easily adjusted with winch; friction brake prevents bed from dropping and handle from spinning upon release.
- Presses with single-acting cylinder offer choice of 2-speed hand operated, electric/ – hydraulic, or air/hydraulic pump. Models with double-acting cylinder have an electric/ hydraulic pump.
- Press models equipped with remote control enable operator to view work from all sides with fingertip control of cylinder piston travel. Â
| Order No. | Cap. (tons) | Type of cylinder used | Stroke | Cylinder Model | Speed (in./min.)
Advance |
Speed (in./min.)***
Pressing |
Pump type | Valve Type | Pump Model + | Weight (lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|
| SPA556 | 55 | Single-Acting | 6 ¼ | C556C | 4.5 | .5 | Air | 2-way foot | PA6 | 804 |
| SPM556 | 55 | Single-Acting | 6 ¼ | C556C | .23 in./stroke | .015 in./stroke | Hand | Load-Release | P159 | 814 |
| SPM5513 | 55 | Single-Acting | 13 ¼ | C5513C | .655 in./stroke | .026 in./stroke | Hand | 2-Way | P460 | 960 |
| SPE556 | 55 | Single-Acting | 6 ¼ | C556C | 21.7 | 1.5 | Elec. | 2-Way** | PE172 | 836 |
| SPE5513 | 55 | Single-Acting | 13 ¼ | C5513C | 21.7 | 1.5 | Elec. | 2-Way** | PE172 | 980 |
| SPE5513S | 55 | Single-Acting | 13 ¼ | C5513C | 24.4 | 1.9 | Elec. | 3-Way* | PE213S | 1056 |
| SPE5513D | 55 | Double-Acting | 13 1/8 | RD5513 | 21.7 | 1.5 | Elec. | 4-Way | PE174 | 993 |
| SPE5513DS | 55 | Double-Acting | 13 1/8 | RD5513 | 66.1 | 5.4 | Elec. | 4-Way* | PQ604S | 1,114 |
| Â*Solenoid valve with 24 volt remote control hand switch
**Holds pressure with motor shut of. Also has an automatic dump setting. Furnished with a 10′ Remote motor control ***Typical performance based on 100 psi and 10,000 psi pump specifications. Actual speeds may vary with operating conditions. + Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 10,000 psi: PE172-67/81; PE21 Series-70; PQ60-74/76; measured at 3 foot distance, all sides. |
||||||||||
PUMP ELECTRICAL SPECIFICATIONS
PE17 Series – 1/2 hp, 115 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle, add suffix « -220″ to order no.
PE21 Series – 2 hp, 230 volt, 60 cycle, single phase. Available in 115 volt, 60 cycle and 230 volt, 50 cycle. To order 230 volt, 50 cycle, add suffix « -220″ to order no. For 115 volt consult factory.
PQ60 Series – 3 hp, 460 volt, 60 cycle, three phase. Availble in 220/380 volt, 60 cycle. To order 380 volt, 50 cycle, add suffix « -380″ to order no.
| Dimensions (in.) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | G | H | K | K | M | Floor Space |
| 72 | 48 1/2 | 36 | 3 ¼-32 3/4 | 6-42 | 6 | 36 | 6 3/4 | 8 | 3 | 12 | 48½ x 36 |
Go to Accessories section for product detail:
Shop Press Accessories:
| Catalog | |
| Operating Instructions | |
| Parts List | |
