Application – Single-acting cylinders.

Actuation – Lever operated.

Functions – Cylinder piston metered “advance,” “hold” and metered “return.”

Used on these pumps – PA17, PA46, PA55, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PQ60, PQ120, PE200, PE400, PG30, PG55, PG120 and PG400 series.

10,000 PSI., 3/8″ PORTS, 5 GPM MAX FLOW RATE.

NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached if desired.

Also, the 9576 can be remote mounted with a 9510 Subplate.

CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application.

IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps.

IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required.
For valves 9502 and 9520, order four 12001 cap screws.
For valve 9576, order four 17428 cap screws.